Would you like to know how to place a tarp on flat roofing? Do you wonder if it’s as straightforward as tarping a peaked roof?
Believe it or not, tarping roofs is much easier than you may think. You still must follow the proper safety and installation protocol to protect your home effectively.
If you’re searching for fundamental insight on how to tarp a flat roof, we can help. Keep reading for the flat roof tips.
1. The Basic Supplies You’ll Need
To tarp a flat roof, you’ll need a few supplies. You’ll need a tarp, some tar paper, a roller, and a brush.
First, you’ll need a big tarp to cover the entire roof. You’ll also need ropes or straps to tie the tarp down and some weights to keep the tarp from blowing away.
If you have any questions about how to tarp a flat roof, be sure to consult a professional for a commercial flat roof repair.
2. Preparing on How to Tarp a Flat Roof
One of the most critical aspects of tarping a flat roof is making sure the roof is adequately prepared before any work begins. Remove any debris, leaves, or dirt from the roof.
After cleaning the roof, inspect it for any damage or signs of wear and tear. If there are any issues, they should be addressed before the tarping process begins.
Once the roof is prepared, the next step is to determine the size and type of tarp that you will need. For smaller roofs, you can use a standard tarp.
3. Laying Down the Tarp
When it comes to tarping a flat roof, the process is pretty straightforward. First, you’ll need to lay down the tarp.
Begin at the bottom of the roof and work your way up, securing the tarp with nails or staples every few feet. Once the tarp is in place, seal the edges with roofing cement or tape.
Seal any seams or gaps to keep water from seeping under the tarp. This prevents water from seeping under the tarp, which can cause damage.
4. Securing the Tarp
A tarp is essential for securing a flat roof. A properly installed tarp will protect the roof from weather damage and prevent leaks.
To tarp a flat roof, measure the covered area and cut the tarp to size. Spread the tarp over the roof and secure it with heavy-duty staples or nails.
5. Finishing Up
Assuming the roof is already built and sheathed. You’ll need to install a layer of 30-pound felt paper over the roof sheathing.
Unroll and staple the felt paper to the sheathing, working your way up the roof, beginning at the bottom edge. Install drip edge flashing around the edges of the roof.
Work your way up the roof, overlapping each row of tar paper by about 6 inches. Be sure to staple the tar paper along the drip edge as well.
You’ll need to install at least two layers of tar paper. Once you’ve reached the top of the roof, install a layer of metal flashing.
This will help deflect water and sun away from your tar paper. Finally, caulk any seams or gaps in the metal flashing.
Tarping a Flat Roof
After following the flat roof guide, your roof should be successfully tarred and you can enjoy its leak-free benefits! Make sure to inspect your roof periodically and patch up any weak areas to prolong its lifespan.
To learn more about flat roof benefits and advantages. Check out more of our posts for more home improvement ideas.
