How to Clean Shower Drains
When you want to learn how to clean shower drains, there are a few steps you should take to do the job right. The first step is to eliminate any buildup gunk and debris buildup. Keeping the drain clean will prevent it from clogging and help prevent hair from accumulating in the gutter. Next, you’ll need to check out any signs of mold and mildew in the area. Finally, you’ll need to ensure you get all the hair out.
Remove buildup gunk
If you’ve been experiencing slow-draining water, you may have built up gunk in your shower drain. The best way to clean up this build-up is to remove it before it forms.
Hair, soap scum, and grease can clog your shower. Regular cleaning can keep your drain clear of these odor-causing messes. However, if you’re looking for a more thorough approach, there are several techniques you can try.
A plunger is a great option for clearing clogs in the shower. Place the plunger flush against the floor and move it up and down to loosen the blockage. Alternatively, use tweezers to grab the clog.
When you remove the clog, rinse the drain thoroughly with hot water. You can also run a little bleach down the drain and leave it to sit for about 15 minutes. This will help to break up the gunk and prevent any future clogs.
Unclog the drain
When it comes to unclogging the shower drain, you have several options. You can get a plumber to help, or you can try some home remedies. There are ways to clear the drain, but it takes determination and a little finesse.
To start, you’ll need a plunger. A plunger is an inexpensive tool that can be bought at your local hardware store. Plungers should be pushed up and down at least five to ten times. This will force the clog to pop out. Afterward, you’ll want to run water to eliminate the clog.
A hand snake can also be used. You can purchase a simple hand snake for around $10 or a more sophisticated version for $30. Again, follow the manufacturer’s directions and wear safety gloves.
Another option is to use a wire coat hanger. The wire has a small hook that can fish out debris and accumulated soap scum.
Prevent hair from accumulating on the drain
Hair in drains can cause serious plumbing problems. They may block the flow of water or even lead to a backup. If you want to avoid these inconveniences, there are several things you can do.
You should always brush your hair before taking a shower to minimize the number of loose strands. Also, using a hair catcher is a good idea. It will catch hair and other debris that can clog your drain.
Another helpful tool is a wire coat hanger. This can be hooked into your shower drain and fish out any clumps of hair that may be lodged.
Using a plunger or a snaking device is another good way to remove hair from your drain. These devices are easy to use, and you’ll find them at most hardware stores.
Using a baking soda and vinegar solution is another effective clog-removal method. This solution is easy to prepare and inexpensive.
Spot signs of mold and mildew
When cleaning a shower drain, you first should find the source of the moisture. You can’t stop water from getting into the home, but you can do something to prevent mold and mildew from developing.
One of the most common sources of moisture is leaks in plumbing or leaking walls. Unfortunately, these minor problems can go unnoticed until you notice a damp or moldy smell.
If you’re unsure how to handle the problem, it’s best to call a professional. Professionals have the tools and the knowledge to remove mold and mildew safely. Then, they’ll use an antifungal cleaner to eliminate the mold.
Mold thrives in a damp environment. It can live underneath things, on surfaces, and even on grout. Mold can be a severe problem for people with allergies, asthma, or respiratory problems. Unfortunately, a bathroom is a perfect place for mold to grow.